Aquatic Dam Stop Leak Professional – Concentrated Formula

The new, faster and most efficient dam sealing solution.

19 kg of Aquatic Dam Stop Leak Professional treats a 317 m2 surfaced dam.

If you have a large Pond or Dam that leaks and has seepage through it’s walls, then you need to use Aquatic Dam Stop Leak Professional. Aquatic Dam Stop Leak ‘Professional’ is a high concentrate Polymer formula used to quickly stop leaking dams and ponds. Aquatic Dam Stop Leak ‘Professional’ is the most concentrated marine friendly dam sealer on the market. It quickly plugs leaking and seeping dams. Aquatic Dam Stop Leak Professional is best suited to larger scale applications.

19 kg of Aquatic Dam Stop Leak Professional treats a 317 m2 surfaced dam.

Aquatic Dam Stop Leak Professional provides a quick, safe and easy to apply method of stopping leaks in irrigation and stock watering dams.

Aquatic Dam Stop Leak Professional stops leaks in dams without the need to empty the dam of water or use large excavation equipment. It can be applied to full or partially full dams.

Aquatic Dam Stop Leak Professional can be spread directly over the surface of a known leak saving time and money. If the location of the leak is not known, simply spread Dam Stop Leak over the whole dam’s water surface.

Aquatic-Technologies-dam-stop-leak-boat-570x320

Aquatic Dam Stop Leak Professional is non-labour intensive, cost effective to apply and begins to work immediately.

Aquatic Dam Stop Leak Professional is non-toxic and environmentally friendly. Our product contains no Potassium like other brands. It is the safest solution on the market.

Aquatic Dam Stop Leak Professional is a granulate polymer which is 99% insoluble. This unique blend of polymers, when applied to the surface of the dam, sink and are sucked into the dam’s cracks to seal any leaks. The leaks are plugged by the expansion of the polymers to create a long lasting seal that becomes part of the dam’s structure.

Aquatic Dam Stop Leak Professional hydrates consistently and substantially more than any other on the market. Our sodium based polymers are so positively pressured and reach maximum saturation without loosing any water, unlike potassium based polymers.

Aquatic Dam Stop Leak Professional formula has a broad range of particle sizes, allowing it to spread further, thus reducing application rates.

Aquatic-Dam-Stop-Leak-from-Aquatic-Technologies-570x320

Application Method

To apply Aquatic Dam Stop Leak Professional simply spread the polymers over the water’s surface by hand or with an Aquatic Hand Held Spreader or powder applicator.Either use a targeted application or treat the whole dam water surface area.

Application Rate

Aquatic Dam Stop Leak Professional at a rate of 60g per square metre of water surface area.

For best results apply Dam Stop Leak when the water temperature is above 5 degrees celsius, the area is free of excessive aquatic vegetation or algae and where wind conditions during application are light.

Always read the label directions & use as directed by the label.